Adding a Damper

In Desigo CC, there are default dampers for all geographic directions, or a re-circulating damper symbol for recirculating air mode. After adding the graphic, the default damper can be rotated as per project requirements.

  1. In the Mode group, conduct one of the following actions:
  • Click Design . Previously rotated objects appear in the default direction.
  • (Optional) Click Test . In this case, the damper does not display in its true size.
  1. In System Browser, select logical view.
  1. Select Logical > [Network name] \...\ [Plant] >
  • [DmpMx (re-circulated air damper)] as 3 damper symbols
  • [Dmp (damper)] > [DmpSu (supply air damper)]
  • [Dmp (damper)] > [DmpOa (outside air damper)]
  • [Dmp (damper)] > [DmpEh (exhaust air damper)]
  • [Dmp (damper)] > [DmpEx (extract air damper)]
  • [Dmp (damper)] > [ByDmp (bypass damper)]
  • [Dmp (damper)] > [DmpMx (mixed air damper)]
  • [Dmp (damper)] > [DmpRc (re-circulated air damper)]
  • And others
  1. Drag the object to the graphics page.
  • The added object is displayed in its true size .

 

Rotating
  • The damper symbol is added to the graphic.
  1. In the Mode group, click Test .
  • The damper symbol displays as per imported data points (analog or digital) in the default direction.
  1. Select the damper symbol.
  1. Left-click and hold, then right-click until the damper symbol displays in the desired direction.
  1. Release the left mouse button.
  • The damper symbol is displayed in the desired direction.
Information

NOTE:
The re-circulated air damper symbol with 3-damper symbols cannot be rotated.